GAS GAS Enduro 2T 250 2018, Руководство пользователя

Страница: 61 / 77

Owner's Manual
-61-
Carburator setting * for xC model
1. find the correction factor to adjust carburizing.
example:
1000 m height and temperature of 35°c, correction 0.94.
2. using the correction factor, select the main jet.
example: factor 0.94, you must multiply the main jet by this number. main
jet = 175 x 0.94 = 165.
3. find your correction factor for the needle and air screw in the table and
change the position of the clip and the air screw opening.
example: Lift up the needle clip and turn the air screw one turn.
COrreCtiOn faCtOrS 250 / 300CC.
(for changes in height or temperature).
Needle position / Air screw opening
Correction factor 1.06 or higher 1.06 ~ 1.02 1.02 ~ 0.98 0.98 ~ 0.94 0.94 or less
Needle position Lower clip 1 position same same same Raise clip 1 position
opening screw free Tighten 1 turn Tighten ½ turn same Loosen ½ turn Loosen 1 turn
note: The values are indicative only
WarninG
To make corrections always take as a basis the competition carburetion. do not
make changes until you are sure they are needed. The specifications are based on
the use of recommended petrol and oil.
correction factor
Temper
atur
e