GAS GAS Enduro 2T 250 2018, Руководство пользователя

Страница: 49 / 77

Owner's Manual
-49-
Maintenance
25 anD 26.-SPOkeS anD wHeelS
The spokes must be evenly tightened and must not have any play, making the tire
off-centre, the other spokes would resent and could rupture.
centring the wheel:
place a dial indicator next to the rim (1) and turn the wheel to measure the axial
centring.
place the dial on the inside of the circumference of the rim (2), turn the wheel and
the difference between the highest and the lowest amount is the centring.
if it is slightly off centre it can be corrected by loosening or tightening some
spokes with the spindle tensioning wrench (3). if the tire is bent or curved it should
be replaced.
note: a welded area on the rim may show excessive de-centring. ignore it when
measuring the centring.
WarninG
interventions on tires and spokes require the assistance of a specialist, so we
recommend that you go to your official Gas Gas service centre.
27.-CHain GuiDe
Lubricate the chain guide (4) with the same product used to lubricate the chain.
28.-CHain GuiDe wear
check the state of the inner faces of the chain guide, where the chain passes,
depending on its state, it must be replaced.
29.- CHain GuiDe SHOe
Visually check the top and bottom of the chain shoe (5) on the swingarm (6). if it
is worn or damaged, replace it.
Lubricate the chain guide with the same lubrication product as the chain.
23.-CalliPer PiStOn anD DuSt COver (all CalliPerS)
for this check, adjustment, or change, please contact your official
Gas Gas
service centre.
24.-Brake HOSeS
for this check, adjustment, or change, please contact your official Gas Gas
service centre.
1
2
3
4
5 6