Owner's Manual
-71-
The gears jump.
Worn shift fork.
contact the official
Gas Gas
official service.
gear grooves worn.
contact the official
Gas Gas
official service.
Broken gear.
contact the official
Gas Gas
official service.
damaged shift drum groove.
contact the official
Gas Gas
official service.
Worn shift fork axle
contact the official
Gas Gas
official service.
selector position spring broken.
contact the official
Gas Gas
official service.
The clutch slips.
Excessive clutch fluid level.
check the level and adjust if necessary.
Worn clutch discs.
contact the official
Gas Gas
official service.
Broken or weak clutch spring.
contact the official
Gas Gas
official service.
The motorcycle is unstable.
cable makes turning of the handlebar difficult.
Remove cable.
The steering axle nut is too tight.
adjust the steering axle nut.
damaged or worn steering bearings.
contact the official
Gas Gas
official service.
Bent steering axle.
contact the official
Gas Gas
official service.
The damping is too hard.
Excessive fork oil level.
Remove excess oil to proper level.
front fork with too much oil viscosity.
drain the oil from the fork and refill with an oil of
suitable viscosity.
Twisted front fork.
contact the official
Gas Gas
official service.
Too much pressure in the tire.
check the tires pressure.
suspension poorly adjusted.
adjust the suspension.
The damping is too soft.
insufficient fork oil level.
add oil to the proper level.
front fork with too little oil viscosity.
drain the oil from the fork and refill with an oil of
suitable viscosity.
Low pressure in the tire
check the tires pressure.
suspension poorly adjusted.
adjust the suspension.
The motorcycle makes abnormal
noises.
chain badly adjusted.
adjust chain tension.
Worn chain.
Replace chain, front and rear sprocket.
Worn rear sprocket teeth.
change rear sprocket.
insufficient lubrication of the chain.
Lubricate chain with proper lubricant.
Rear wheel misaligned.
check the tension of the spokes of the rim.
Readjust if necessary.
front fork spring weak or broken.
Replace front fork spring.
Brake disc worn.
Replace the brake disc.
misplaced, worn or glazed pads
Reposition the pads or change them.
damaged cylinder.
contact the official
Gas Gas
official service.
supports, nuts, bolts badly tightened.
check and adjust to the appropriate tightening
torques.
troubleshooting
Содержание Enduro 2T 250 2018
