Garmin GEA 71, Руководство пилота

Страница: 442 / 482

Garmin G1000 Pilot’s Guide for the Piper PA-32 Saratoga
190-02692-00 Rev. A
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
422
APPENDIX A
Message Comments
G/S1 SERVICE
– G/S1 needs service.
Return unit for repair.
A failure has been detected in glideslope receiver 2. The receiver may still be
available. The G1000 system should be serviced when possible.
G/S2 FAIL – G/S2 is inoperative. A failure has been detected in glideslope receiver 2. The G1000 system should be
serviced.
G/S2 SERVICE
– G/S2 needs service.
Return unit for repair.
A failure has been detected in glideslope receiver 2. The receiver may still be
available. The G1000 system should be serviced when possible.
GDC1 MANIFEST – GDC1 software
mismatch, communication halted.
The GDC 74A has incorrect software installed. The G1000 system should be serviced.
GDL69 CONFIG – GDL 69 config error.
Config service req’d.
GDL 69A/69A SXM configuration settings do not match those of backup configuration
memory. The G1000 system should be serviced.
GDL69 FAIL
– GDL 69 has failed. A failure has been detected in the GDL 69A/69A SXM. The receiver is unavailable.
The G1000 system should be serviced
GDL69 MANIFEST – GDL software
mismatch, communication halted.
The GDL 69A/69A SXM has incorrect software installed. The G1000 system should
be serviced.
GEA1 CONFIG
– GEA1 config error.
Config service req’d.
The GEA1 configuration settings do not match those of backup configuration memory.
The G1000 system should be serviced.
GEA1 MANIFEST
– GEA1 software
mismatch, communication halted.
The #1 GEA 71 has incorrect software installed. The G1000 system should be
serviced.
GEO LIMITS – AHRS1 too far North/
South, no magnetic compass.
The aircraft is outside geographical limits for approved AHRS operation. Heading is
flagged as invalid.
GIA1 CONFIG
– GIA1 audio config
error. Config service req’d.
The GIA1 have an error in the audio configuration. The G1000 system should be
serviced.
GIA1 CONFIG
– GIA1 config error.
Config service req’d.
The GIA1 configuration settings do not match backup configuration memory. The
G1000 system should be serviced.
GIA1 COOLING – GIA1 over
temperature.
The GIA1 temperature is too high. If problem persists, the G1000 system should be
serviced.
GIA1 COOLING
– GIA1 temperature
too low.
The GIA1 temperature is too low to operate correctly. Allow units to warm up to
operating temperature.
GIA1 MANIFEST – GIA1 software
mismatch, communication halted.
The GIA 1 has incorrect software installed. The G1000 system should be serviced.
GIA1 SERVICE – GIA1 needs service.
Return unit for repair.
The GIA1 self-test has detected a problem in the unit. The G1000 system should be
serviced.
GIA2 CONFIG
– GIA2 audio config
error. Config service req’d.
The GIA2 have an error in the audio configuration. The G1000 system should be
serviced.
GIA2 CONFIG – GIA2 config error.
Config service req’d.
The GIA2 configuration settings do not match backup configuration memory. The
G1000 system should be serviced.
GIA2 COOLING – GIA2 over
temperature.
The GIA2 temperature is too high. If problem persists, the G1000 system should be
serviced.
GIA2 COOLING
– GIA2 temperature
too low.
The GIA2 temperature is too low to operate correctly. Allow units to warm up to
operating temperature.
GIA2 MANIFEST – GIA2 software
mismatch, communication halted.
The GIA 2 has incorrect software installed. The G1000 system should be serviced.