Garmin GEA 71, Руководство пилота

Страница: 268 / 482

Garmin G1000 Pilot’s Guide for the Piper PA-32 Saratoga
190-02692-00 Rev. A 248
FLIGHT MANAGEMENT
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
t
emPeratUre
C
omPensation for
a
PProaCh
m
inimUms
A temperature compensated minimum descent altitude can be entered for the approach. Once this is
entered, the altitude is also displayed on the PFD.
Entering a temperature compensated minimum into an approach:
1)
From the FPL – ACTIVE FLIGHT PLAN Page, press the PROC Key. The PROCEDURES Window is displayed.
2) If necessary, turn the large FMS Knob to highlight SELECT APPROACH. Press the ENT Key.
3) If necessary, use the
FMS
Knob and the
ENT
Key to select the desired airport, approach, and transition.
4) Use the
FMS
Knob to place the flashing cursor in the MINIMUMS Box. Turn the small
FMS
Knob to select TEMP
COMP. Press the ENT Key.
5) Turn the small
FMS
Knob to enter the minimums altitude. Press the
ENT
Key. The cursor is placed in the ‘TEMP
AT <destination airport>’ Field.
6) Turn the small FMS Knob to enter the temperature at the destination. Press the ENT Key.
7) Press the
ENT
Key with either LOAD? or ACTIVATE? highlighted. The approach is added to the active flight plan,
and the temperature compensated minimums are displayed on the PFD.
Figure 5-84 Entering Temp Comp Minimums
Temperature at
destination
PROC – APPROACH LOADING Page
Temperature
Compensated
Minimum
COMP MIN Shown on PFD
Approach
minimum