manualshive.com logo in svg

Garmin GEA 71, Руководство пилота

Garmin GEA 71 - аналоговый входной базовый блок для системы автопилота. Установочное руководство можно бесплатно скачать с manualshive.com. Подробное руководство поможет установить и настроить устройство для оптимальной производительности.

Поделиться
Скачать
background image

190-02692-00  Rev. A

Garmin G1000 Pilot’s Guide for the Piper PA-32 Saratoga

SY

STEM

O

VER
VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID
ANCE

AFCS

ADDITIONAL

FEA
TURES

APPENDICES

INDEX

421

APPENDIX A

Message

Comments

COM2 SERVICE 

 – COM2 needs service.  

Return unit for repair.

The system has detected a failure in COM2.  COM2 may still be usable.  The G1000 
system should be serviced when possible.

COM2 TEMP 

 – COM2 over temp.  

Reducing transmitter power.

The system has detected an over temperature condition in COM2.  The transmitter 
is operating at reduced power.  If the problem persists, the G1000 system should be 
serviced.

CURSOR LIMITED 

 – Map panning limit 

has been reached.

Map cursor panning is limited to < 89 degrees north or south.

DATA LOST 

 – Pilot stored data was lost.  

Recheck settings.

The pilot profile data was lost.  System reverts to default pilot profile and settings.  The 
pilot may reconfigure the MFD & PFDs with preferred settings, if desired.

DB CHANGE 

 – Database changed.  

Verify stored airways.

This occurs when a stored flight plan contains an airway that is no longer consistent 
with the navigation database.  This alert is issued only after an navigation database 
update.  Verify use of airways in stored flight plans and reload airways as needed.

DB CHANGE 

 – Database changed.  

Verify user modified procedures.

This occurs when a stored flight plan contains procedures that have been manually 
edited.   This alert is issued only after an navigation database update.  Verify the user-
modified procedures in stored flight plans are correct and up to date.

DB MISMATCH 

 – Navigation database 

mismatch.  Xtalk is off.

The PFDs and MFD have different navigation database versions or regions installed.  
Crossfill is off.  Check the AUX-SYSTEM STATUS Page to determine versions or regions.  
Also, check the AUX-SYSTEM STATUS Page for a database synchronization function 
not completed.  After synchronization is complete, power must be turned off, then on.

DB MISMATCH 

 – Obstacle database 

mismatch.

The PFDs and MFD have different obstacle database versions or regions installed.  
Check the AUX-SYSTEM STATUS Page to determine versions or regions.  Also, 
check the AUX-SYSTEM STATUS Page for a database synchronization function not 
completed.  After synchronization is complete, power must be turned off, then on.

DB MISMATCH 

 – Standby Navigation 

database mismatch.

The PFDs and MFD have different standby navigation database versions or regions 
installed.  Check the AUX-SYSTEM STATUS Page to determine versions or regions.  
Also, check the AUX-SYSTEM STATUS Page for a database synchronization function 
not completed.  After synchronization is complete, power must be turned off, then on.

DB MISMATCH 

 – Terrain database 

mismatch.

The PFDs and MFD have different terrain database versions or regions installed.  
Check the AUX-SYSTEM STATUS Page to determine versions or regions.  Also, 
check the AUX-SYSTEM STATUS Page for a database synchronization function not 
completed.  After synchronization is complete, power must be turned off, then on.

FAILED PATH 

 – A data path has failed. A data path connected to the GDU or the GIA 63/W has failed.

FPL TRUNC 

 – Flight plan has been 

truncated.

This occurs when a newly installed navigation database eliminates an obsolete 
approach or arrival used by a stored flight plan.  The obsolete procedure is removed 
from the flight plan.  Update flight plan with current arrival or approach.

FPL WPT LOCK 

 – Flight plan waypoint 

is locked. 

Upon power-on, the G1000 system detects that a stored flight plan waypoint is 
locked.  This occurs when an navigation database update eliminates an obsolete 
waypoint.  The flight plan cannot find the specified waypoint and flags this message.  
This can also occur with user waypoints in a flight plan that is deleted. Remove the 
waypoint from the flight plan if it no longer exists in any database, or Update the 
waypoint name/identifier to reflect the new information. 

G/S1 FAIL 

 – G/S1 is inoperative.

A failure has been detected in glideslope receiver 2.  The G1000 system should be 
serviced.

Содержание GEA 71



































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для GEA 71

Zonet ZUB6111C User Manual preview
ZUB6111C
Бренд: Zonet Страницы: 63
Telex HB-3+ Quick Start Manual preview
HB-3+
Бренд: Telex Страницы: 6
Telstra BIGPOND USB 4G Getting To Know Manual preview
BIGPOND USB 4G
Бренд: Telstra Страницы: 28
Instar IN-LAN 500 Quick Installation Manual preview
IN-LAN 500
Бренд: Instar Страницы: 14
LogiLink VG0001 Quick Installation Manual preview
VG0001
Бренд: LogiLink Страницы: 2
Endura A-CA74E Instruction Manual preview
A-CA74E
Бренд: Endura Страницы: 2
Keysight Technologies E2613A User Manual preview
E2613A
Бренд: Keysight Technologies Страницы: 24
l-com ARK-2404U-3 User Manual preview
ARK-2404U-3
Бренд: l-com Страницы: 34
Cisco WUSB54GSC User Manual preview
WUSB54GSC
Бренд: Cisco Страницы: 57
Cisco WUSB100 User Manual preview
WUSB100
Бренд: Cisco Страницы: 37
Cisco PA-MC-2T3-EC= Installation And Configuration Manual preview
PA-MC-2T3-EC=
Бренд: Cisco Страницы: 96
Cisco PA-5EFL= Installation And Configuration Manual preview
PA-5EFL=
Бренд: Cisco Страницы: 64
Cisco PA-MC-T3 Installing And Removing preview
PA-MC-T3
Бренд: Cisco Страницы: 18
Cisco PA-2JT2 Installation And Configuration Manual preview
PA-2JT2
Бренд: Cisco Страницы: 28
Cisco WPC54G User Manual preview
WPC54G
Бренд: Cisco Страницы: 49
Cisco PA-4R-DTR Installation And Configuration Manual preview
PA-4R-DTR
Бренд: Cisco Страницы: 48
Cisco PA-2CE1 Series Installation And Configuration Manual preview
PA-2CE1 Series
Бренд: Cisco Страницы: 60
Cisco PA-8T-232 Installation And Configuration Manual preview
PA-8T-232
Бренд: Cisco Страницы: 106

Бренды по названию

Популярные бренды

Загрузить еще бренды