manualshive.com logo in svg

Garmin GEA 71, Руководство пилота

Поделиться
Скачать
Garmin GEA 71 Скачать руководство пользователя страница 387

190-02692-00  Rev. A

Garmin G1000 Pilot’s Guide for the Piper PA-32 Saratoga

367

HAZARD AVOIDANCE

SY

STEM

O

VER
VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID
ANCE

AFCS

ADDITIONAL

FEA
TURES

APPENDICES

INDEX

TRAFFIC DESCRIPTION

The symbols used to display ADS-B traffic are shown in the following table.  Above or below the traffic symbol 

is the traffic identifier, and altitude.  A small up or down arrow next to the traffic symbol indicates the traffic is 
climbing or descending at a rate of at least 500 feet per minute.

Symbol

Description

Traffic Advisory with directional information.  Points in the direction of the intruder aircraft track.

Traffic Advisory without directional information.

Traffic Advisory out of the selected display range.  Displayed at outer range ring at proper bearing.

Proximity Advisory with directional information.  Points in the direction of the aircraft track.

Proximity Advisory without directional information.

Non-threat traffic with directional information.  Points in the direction of the intruder aircraft track.

Non-threat traffic without directional information.

Traffic located on the ground with directional information.  Points in the direction of the aircraft track.  Ground traffic is 
only displayed when ADS-B is in Surface (SURF) Mode or own aircraft is on the ground.
Ground traffic without directional information.  Ground traffic is only displayed when ADS-B is in Surface (SURF) Mode or 
own aircraft is on the ground.

Non-aircraft ground traffic.  Ground traffic is only displayed when ADS-B is in Surface (SURF) Mode or own aircraft is on 
the ground.

Table 6-32  ADS-B Traffic Symbology

OPERATION

MAP - TRAFFIC MAP PAGE

The MAP - TRAFFIC MAP Page shows surrounding traffic data in relation to the aircraft’s current position 

and altitude, without basemap clutter.  Aircraft orientation is always heading up unless there is no valid 
heading.  Map range is adjustable with the 

Joystick

, as indicated by the map range rings.

The traffic mode and altitude display mode are annunciated in the upper left corner of the page.

Содержание GEA 71



































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды