55
Messages
Appendix D
None Found
- A search through MapSource data, using the selected criteria, has produced no matching results.
Processor Failed
- The unit has detected a fault in its internal processor. If this message persists, the unit is
unusable - return it to GARMIN for service.
Route Memory is Full
- Route memory is full and no more routes can be saved or added (from another GPS
unit or a PC).
Route Truncated
- The route has been truncated because it was too long. There will be turns missing prior
to the destination.
Route Waypoint Memory is Full
- There is no more space for map-based route waypoints (used for turns).
Safe Mode is Turned On
- The action attempted is disabled while moving to prevent distractions while riding.
Sunrise, Switching to Day Mode
- The map is switching to the Day Mode display.
Sunset, Switching to Night Mode
- The map is switching to the Night Mode display.
That Route Name is Already Used
- The route name you have entered is already being used by another route.
Too Many Maps on Data Card
- The data card contains more maps than the unit software can process.
Too Many Vias for Road Navigation
- The route contains too many via points (intermediate destinations). The
route can only be navigated in an off-road, or point-to-point fashion.
Track Memory is Full
- Track Log memory is full. No additional track log data can be stored without deleting
old data to create memory space.
Track Truncated
- A complete uploaded track will not fi t in memory. The oldest track log points were deleted
to make space for the most recent data.
Waypoint Memory is Full
- You have used all 500 waypoints available. Delete unwanted waypoints to make
space for new entries.
Waypoint Name Already Used
- The waypoint name you have entered is already used by another waypoint.
RF Owners Manual Rev A.indd
08/20/01, 11:24 AM
55