49
Reference
To select an input/output interface format:
1. With the System Setup on the screen, select the fi le tab for ‘Interface’ and press
ENTER
.
2. Use down portion of the
ROCKER KEYPAD
to select the ‘FORMAT’ fi eld and press
ENTER
.
A pop-up window will show the available settings.
3. Use the
ROCKER KEYPAD
to select the desired setting and press
ENTER
.
4. If required for the setting, highlight the ‘BAUD RATE’ fi eld, press
ENTER
, select the desired rate
and press
ENTER
again.
5. For GARMIN DGPS and RTCM In/NMEA Out, the ‘BEACON’ fi eld may be set to ‘Scan’ or ‘Manual’.
If ‘Manual’ is selected, enter the beacon frequency and bit rate in the appropriate fi elds.
System Setup
You can select an I/O Interface Format from the Format
Menu.
RF Owners Manual Rev A.indd
08/20/01, 11:24 AM
49