39
Map Source/System
Information
Reference
MapSource Info
The MapSource info option displays version and map name(s) for any MapSource CD-ROM data
stored on an installed cartridge. A box appears to the immediate left of each map name (directly under
‘Enabled’). When the box is checked, the designated MapSource data will appear on the map—at the
appropriate map scales and when within the boundaries of that map’s area.
Also, when the box is checked the automatic routing data for that area is available. Routing data
is prioritized by type. If City Navigator and MetroGuide data are both available for the same area,
the City Navigator data will be used to determine routing. Keep this in mind, since there may be
times (e.g., outside the urban core area of City Navigator’s data) when using MetroGuide data will
be preferable.
To turn individual MapSource maps on or off:
1. Optional MapSource data must fi rst be uploaded to a cartridge installed in your Navigator.
2. Select the ‘MapSource Info’ option from the Main Menu, then use the
ROCKER KEYPAD
to scroll
through the list of available maps.
3. If a check mark appears in the box to the left of a map name, that map is turned on and will
appear on the map display. If necessary, highlight the name of any listed map and press
ENTER
to add or remove the check mark.
Address and POI (points of interest) Find functions are always enabled for any MapSource City
Navigator or MetroGuide map loaded on the cartridge, regardless of whether the ‘Enabled’ box is
checked or not.
System Info
The System Info window shows the unit software version and unit ID number which you need
to have handy when you are unlocking detailed coverage areas from the GARMIN web site (see the
Quick Start Guide for details).
Check the box for the MapSource data that you want
displayed on the map.
You will need the unit ID number to unlock detailed
coverage areas from the GARMIN web site.
RF Owners Manual Rev A.indd
08/20/01, 11:24 AM
39