Garmin Approach G5 - GPS-Enabled Golf Handheld, Руководство пользователя

Страница: 88 / 168

Garmin G5 User's Manual 190-02072-00 Rev. B
76
Installation Manual
Installation Manual
Pilot's Guide
Index
1.7.4.9 RS-232 CONFIGURATION PAGE
This page allows for configuration of the serial communication port on the G5. Both
the input and output serial port formats can be configurated independently. Some
input/output formats will also allow for a configurable baud rate.
A green checkmark will appear next to the input format selection when the RS-232
port is receiving valid data. A green checkmark will not appear if data has not yet been
received by the unit. A red "X" is displayed if no data has been received after an initial
time-out period, or if data has been received and then interrupted.
Table 1-19 RS-232 Configuration Settings
Configuration
Setting
Description
Garmin
Instrument Data Used for connecting to compatible Garmin LRUs (e.g. GMC 30X).
NMEA
Supports the input and output of standard NMEA 0183 version
3.01 data at a configurable baud rate of either 4800 or 9600. The
G5 outputs GPS data via NMEA sentences.
Aviation
The proprietary format used for input of navigation data to the
G5 at a fixed baud rate of 9600 from an FAA certified Garmin
panel mount unit. If the external GPS navigator supports both the
Aviation and MapMX formats, the MapMX format is recommended.
MapMX
The preferred input format when interfacing with an external
navigator. This format is only available from Garmin units equipped
with a WAAS GPS receiver.
Garmin VHF Nav
Radio
Receives lateral and vertical NAV deviation signals as an input
format. Transmits frequency tuning and radial selection data to a
GNC 255 or SL 30 NAV radio as an output format.
Altitude Encoder
Outputs altitude encoder data to a compatible transponder. Both
Icarus and Shadin-format messages are output when using this
format