AFTER SALES SUPPORT
17
1300 855 831
MODEL: MFH3300-4P PRODUCT CODE: 47629 02/2017
AUS
MFH3300-4P
Safety regulations
m
CAUTION!
The cutting tool continues rotating for a few seconds after the
engine is turned off.
•
Put the tool down only after the cutting tool has completely stopped and the
motor is turned off.
•
When the cutting tool is damaged, it must be replaced at once.
•
Always use the original line only. Never use a metal wire instead of the nylon
line.
•
Tool and cutting tools must be properly inspected and serviced periodically.
Damages must be repaired by a service center.
•
Only use accessories recommended by the manufacturer.
•
Have your tool serviced only by qualified personnel and by use of original spare
parts only. This ensures that the tool will work safely in the future.
Remaining hazards
•
There will always be residual risks, even if you use this equipment according to
instructions. The following hazards can occur in connection with the construc-
tion and design of this tool.
•
Health hazards resulting from swinging of hand and arm if the equipment is
used for an extended period and if it is not operated or maintained properly.
•
Injuries and material damage caused by ejection of tool attachments which are
unexpectedly thrown from the equipment because of sudden damage, wear and
tear or improper attachment.
•
Use the gripping spikes for every cut as the starting point and always start the
cut with the saw chain running. Make the cut in such a way that the saw does
not get jammed in the wood.
•
Pay particular attention to branches under tension.
•
Always pull the tool out of the wood when the saw chain is running.
•
Never work with the tool above shoulder height or with only one hand.
•
Always stand away from the falling direction. Position yourself on a slope above
the tree to be felled.
•
Always stand sideways when carrying out sawing work on a tree which is locat-
ed on a slope, never work from above or below.
•
Always look out for the falling direction of the parts which are cut off.
•
Never start the cut with the bar tip and never cut with the bar tip.
•
Risk of kickback! There is always a risk of kickback when the bar tip touches
the wood or other objects. This makes the chainsaw uncontrollable and it may
be thrown towards the operator with great force.
•
Do not use the tool as a lever to move objects.
•
Always use the chain guard during transport and storage.
•
Secure the tool during transport in order to prevent loss of petrol, damage or
injury.
