16
AFTER SALES SUPPORT
1300 855 831
MODEL: MFH3300-4P PRODUCT CODE: 47629 02/2017
AUS
Safety regulations
MFH3300-4P
pletely stopped and turn off the engine.
•
Never leave the tool unsupervised at the place of work. Store the tool at a safe
place when not in use.
•
People operating the machine must not be distracted.
•
Never use the tool during rain, in a humid or wet environment and do not store it
outdoors.
•
Should the tool become wet, wait until it is completely dry before you use it
again.
•
Before starting work, check the work area to be cut for possible foreign objects
and to remove them before you start. Should you encounter a foreign object
during cutting, switch off the tool before removing this object.
•
If the tool is jammed by a foreign object (stones, piles of grass etc), switch it
off and remove the object using a blunt item. Never use your fingers to remove
jammed foreign objects as this may cause serious injuries.
•
Always keep the running tool away from your body.
•
Attention: the cutting tool still runs for some time after the tool is switched off!
•
Do not overload the engine, and do not use it for work the tool is not designed
for.
•
Always make sure the ventilation openings are free of dirt.
•
Store the tool out of the reach of children.
•
Store the tool at a safe and dry location.
•
Check the engine for damages after impact, or other damages.
•
Keep body parts and pieces of clothing away from the trimmer head when you
start the engine, or keep it running.
•
Always keep in mind that especially during trimming of lawn edges, gravel
enclosures, and similar locations stone and dirt can be hurled away from the
cutting line.
•
Never cross roads or paths when the tool is switched on.
•
Never cut against hard objects such as stone, etc. This way you avoid injuries,
and damages to the tool.
•
Never use the tool without the guards attached.
•
Never use your hands to stop the cutting device.
•
Always wait until it stops on its own.
•
Hold and guide the trimmer head as close to the ground as possible.
•
Only cut grass growing on the ground. Do not cut grass in cracks in walls, grow-
ing or on rocks, etc.
•
Always make sure no objects, or other debris is collecting in the trimmer head,
in the protective hood, or in the engine.
•
Only use the tool, when the guard is attached.
•
Always switch off the tool, before you put it down.
•
Keep in mind that there is risk of injuries in the area of the cutting device intend-
ed to cut off the line.
