AFTER SALES SUPPORT
13
1300 855 831
MODEL: MFH3300-4P PRODUCT CODE: 47629 02/2017
AUS
MFH3300-4P
Scope of delivery/Intended use
Combined oil/petrol cylinder
(1x)
Cover
(1x)
Open-ended spanner (8 mm / 10 mm) (1x)
Nuts M5
(4x)
Allen key (size 4)
(1x)
Manual
(1x)
Allen key (size 6)
(1x)
•
Open the packaging and take out the equipment with care.
•
Remove the packaging material.
•
Check that all listed contents are present.
•
Inspect the equipment and parts for any damage. Please contact the helpline if
anything is missing.
•
If possible, keep the packaging until the end of the guarantee period.
•
Read the operating instructions fully to familiarise yourself with the tool prior to
using it.
•
Only use original accessories and spare parts. Spare parts are available by con-
tacting the helpline.
•
Specify the part numbers when you contact the helpline.
m
ATTENTION!
The device and packaging materials are not toys!
Children must not be allowed to play with plastic bags, film and small parts!
There is a risk of swallowing and suffocation!
IV. INTENDED USE
The brush cutter (using the cutting blade) is designed for cutting young trees, large
weeds and undergrowth.
The power trimmer (using the line spool with cutting line) is designed for cutting
lawns, grassed areas and smaller weeds.
The hedge trimmer is suitable for cutting hedges, bushes and shrubs.
The pole-mounted chainsaw is designed for lopping off tree branches. It is not suita-
ble for extensive sawing work, felling trees or cutting any materials other than wood.
The operating instructions as supplied by the manufacturer must be followed at all
times to ensure that the equipment is used properly. Any use which is not expressly
permitted in the manual may result in damage to the equipment and place the user
in serious danger. Observe the restrictions in the safety instructions.
m
IMPORTANT!
Due to the high risk of bodily injury to the user, the brush cutter
must not be used to carry out the following work: to clean dirt and debris off walk-
ways, or to chop up tree or hedge clippings. Similarly, the brush must not be used to
level out raised soil or natural areas. For safety reasons, the drive unit must not be
used as a drive unit for other work tools or tool-kits of any kind.
