Gardenline MFH3300-4P Скачать руководство пользователя страница 31

Страница: 31 / 34

AFTER SALES SUPPORT



[email protected]



1300 855 831

MODEL: MFH3300-4P PRODUCT CODE: 47629 02/2017

AUS

Troubleshooting

MFH3300-4P

Machine does

not work at full

power.

• Machine is overloaded.

•

Air filter is contaminated.

• Carburetor set up incorrect-

ly.

• Silencer is blocked.

• Do not use force during mowing/

trimming.

•

Clean the air filter or replace it.

• Contact the service centre.

• Check the exhaust.

Brush cutter

does not work

at full power.

• Blades are blunt or dam-

aged.

• Cut material is too high

(machine overload).

• Sharpen or replace blades.

• Cut the grass in phases.

Grass trimmer

does not work

at full power.

• Cutting line too short or

damaged.

• Machine is overloaded be-

cause the grass is too high.

• Feed more cutting line through

or replace it.

• Cut the grass in phases.

Cutting line

cannot be fed

through.

• Spool empty.

• Replace spool.

Chain saw

does not saw,

it plucks or

vibrates.

• Chain tension too high.

• Chain blunt.

• Chain attached incorrectly.

• Chain worn.

• Check and reset chain tension.

• Have the chain sharpened or

replace it.

• Re-attach the chain.

• Replace the chain.

Saw chain

becomes hot

or saw chain

lubrication

does not

work.

• No oil in the tank.

• Oil line blocked.

• Chain tension too high.

• Chain blunt.

•

Refill oil.

• Clean the oil line.

• Set the chain tension.

• Have the chain sharpened or

replace it.

Содержание MFH3300-4P



































Результаты поиска

Содержание MFH3300-4P

Отзывы:

Похожие инструкции для MFH3300-4P

Бренды по названию

Популярные бренды

Gardenline MFH3300-4P, Руководство пользователя

Результаты поиска

Содержание MFH3300-4P

Отзывы:

Похожие инструкции для MFH3300-4P

Бренды по названию

Популярные бренды