4.7.1 To adjust the cutting height
WARNING:
Use protective gloves.
1.
Push the ON/OFF button for 3 seconds to switch
off the product.
2.
Make sure that the product is disabled. The
indicator lamp on the ON/OFF button is not lit
when the product is disabled. Refer to
indicator on the keypad on page 9
.
3.
Pull up the top cover clockwise by hand and
remove it.
4.
Remove the torx that is attached to the body of the
product.
5.
Turn the product upside down.
6.
Remove the 2 screws on the blade disc.
7.
Lift up the blade disc.
8.
Install the blade disc on the shaft. Select a cutting
height and align the 2 holes on the blade disc with
the 2 holes in the shaft.
9.
Attach the 2 screws on the blade disc to install the
shaft on the blade disc.
10. Put back the torx on the body of the product.
11. Attach the top cover on the product.
1585 - 007 - 26.10.2022
Operation - 25
