Note:
The frost sensor is located inside the chassis
and there can be a delay compared to the ambient
temperature.
3.10.10 New loop signal
The loop signal is randomly selected to create a unique
link between the product and the charging station. In
rare cases, there may be a need to generate a new
signal, for instance if two adjacent installations have
a very similar signal. Put the product in the charging
station before you make a new loop signal.
3.10.11 PIN code
The PIN code is a combination of 4 buttons on the
keypad. When you use the product for the first time you
must enter the factory PIN code. You can change the
PIN code in the GARDENA Bluetooth
®
App.
Note:
The ON/OFF button, the Park button, the Start
button and the Start/Schedule buttons can be included
in the PIN code.
3.10.11.1 To enter the factory PIN code
1.
Push the ON/OFF button (A).
2.
Push the Start/Schedule button (B).
3.
Push the Start button (C).
4.
Push the Park button (D).
A
D
B
C
3.10.12 ZoneProtect
If you install the ZoneProtect accessory, you must
enable the ZoneProtect function of the product.
3.10.13 Reset all user settings
Use this function to reset all user settings.
Note:
PIN code, Loop signal
and
Messages
are not
reset when you select
Reset all user settings
.
1585 - 007 - 26.10.2022
Installation - 21
