3 - INSTRUCTIONS FOR USE
100
000
00
MA
TURNING ON AND OFF
When power is supplied, the card displays for several se-
conds the software version.
Then the oven goes to the OFF status and on the time
display the LED is turned on and it stays on hold.
By pressing ON/OFF :
you turn the card on;
all the displays turn on;
point value to be inserted:
- default temperature 100 °C,
- default timer 000,
- default humidity 0,
- default program display MA (manual function of the
oven).
When the temperature is set using the + or - keys, the di-
the set value, or, by pressing the temperature key it im-
mediately accepts the set value and the display shows
automatically.
When the time is set using the + or - keys on the display
set value, or, by pressing the time key it immediately ac-
cepts the set value and the display shows the set time
-
tically.
When the humidity value is set using the + or - key the
the set value, or, by pressing the humidity key it immedia-
tely accepts the set value.
At this point all the displays are permanent and show the
set values. The programs display remains in the MA po-
P key is pressed in
order to access the programming.
During the cooking cycle, at the stage of variation of the
set parameters, by pressing the relevant key (temperatu-
re, time, humidity) and using the + or - keys, it is possi-
ble to change the parameters waiting for 15 seconds or
pressing the relevant key and the program does not go
automatically to the following value as in the initial stage.
ON/OFF key or at
the end of the cooking cycle, the set parameters are sto-
red for 5 minutes.
restarted, to the MA (manual) operation.
