G&D VisionXS-F-DP-UHR, Инструкция по установке и эксплуатации

Страница: 120 / 216

Installation
8 · G&D VisionXS-F-DP-UHR
Installing the computer module
The computer, whose signals are transmitted to the remote console, is connected to
the VisionXS-CPU computer module.
Establishing a connection to a local management network
Network:
Insert a category 5 twisted pair cable (or better), which is available as acces-
sory. Connect the other end of the cable to the local network.
Connecting the computers´s keyboard and mouse signals
USB CPU:
Use the USB-AM/BM-2 cable to connect one of the computer’s USB inter-
faces to this interface.
NOTE:
All device variants of the VisionXS series can be operated with an external
power supply at the Power interface (for DT variants: Main Power ).
The illustrations in this chapter show the DT variant of the device series. This
variant is additionally equipped with an internal power supply ( Red. Power ).
NOTE: If desired, connect this network interface to a local network. This enables
you to access the
Config Panel
web application from this network and to send sys-
log messages to this network.
Pwr Main Power Red. Power Network Service Transmission 2 Transmission 1 Pwr Main Power Red. Power Service Transmission 2 Transmission 1
Line In Serial
USB CPU
DP CPU Line In Serial DP CPU