G&D VisionXS-F-DP-UHR, Инструкция по установке и эксплуатации

Страница: 135 / 216

Initial configuration of the network settings
G&D VisionXS-F-DP-UHR · 23
English
Configuring global network settings
Even in complex networks global network settings ensure that the KVM extender is
available from all partial networks.
How to configure global network settings:
1. Use the local hotkey ( default : Alt + Num ) to open the local OSD to configure the net-
work interface of the console module or use the remote hotkey ( default : Ctrl + Num ) to
open the remote OSD to configure the network interface of the computer module .
2. Select the entry Network (local OSD) or Network setup (remote OSD) and press
Enter .
3. Select the entry Interfaces and press Enter .
4. Enter the following data under Main Network :
5. Press F2 to save your settings.
Global
preferences:
Press
F8
to select the global preferences:

Static: uses static settings.
 DHCP:
obtains settings from a DHCP server.
Hostname: Enter the device hostname.
Domain: Enter the domain the device is to belong to.
Gateway: Enter the gateway IP address.
DNS 1: Enter the IP address of the DNS server.
DNS 2: Optionally, enter the IP address of another DNS server.