G&D VisionXS-F-DP-UHR, Инструкция по установке и эксплуатации

Страница: 196 / 216

Configuration
84 · G&D VisionXS-F-DP-UHR
Information display
Information displays are shown temporarily (5 seconds) in the upper left corner.
The information display can also be shown permanently or it can be disabled.
How to change the setting of the information display:
Adjusting the transparency of the OSD
In the default settings of the KVM switch, the OSD covers parts of the screen con-
tent. However, the parts of the screen contents covered by the OSD are still visible.
You can adjust the transparency level or turn the transparency off.
How to adjust the transparency of the OSD:
OSD
1. Press Ctrl+Num ( default ) to open the OSD.
2. Press F10 to open the Personal Profile menu.
3. Under Display press F8 to select between the following options:
off  information display is turned off
temp  information display is shown temporarily for 5 seconds ( default )
permt  permanent information display
4. Press F2 to save your settings.
OSD
1. Press Ctrl+Num ( default ) to open the OSD.
2. Press F10 to open the Personal Profile menu.
3. Under OSD transparency press F8 to select one of the following options:
high  high transparency of the screen content
average  average transparency of the screen content ( default )
low  low transparency of the screen content
off  screen content is covered
4. Press F2 to save your settings.