G&D VisionXS-F-DP-UHR, Инструкция по установке и эксплуатации

Страница: 192 / 216

Configuration
80 · G&D VisionXS-F-DP-UHR
Selecting a keyboard layout for inputs via OSD
If the on-screen display shows other characters than entered on the console key-
board, the keyboard layout has to be adjusted.
Make sure which keyboard layout the connected keyboard uses and configure it in
the settings of the console module.
How to change the keyboard layout of the keyboard of the console module:
OSD
1. Open the remote OSD of the computer module by pressing the remote hotkey
( default : Ctrl+Num ), if you want to change the hotkey for the remote OSD.
Open the local OSD of the console module by pressing the local hotkey
( default : Alt+Num ), if you want to change the hotkey for the local OSD.
2. Select the row Console setup and press Enter (remote OSD) or select the row
Keyboard/Mouse and press Enter (local OSD).
3. Under OSD key. layout press F8 to select one of the following options:
 german
 english US
 english UK
 french
 spanish
 lat. americ.
 portuguese
 swedish
 swiss-french
 danish
4. Press F2 to save your settings.