G&D DVIMUX8-OSD-USB, Инструкция по установке и эксплуатации

Страница: 90 / 140

Getting started
16 · G&D DVIMUX8-OSD-USB
How to access a particular computer by using key combinations:
1. Press the Select Key key combination at the console keyboard.
In the default configuration, you can switch the channel by pressing Ctrl and the
select keys 1 to 8 .
The channel is switched after the keys are released.
Further information:
 Changing hotkeys or double hotkeys on page 46
 Changing select keys on page 48
 Defining select keys on page 34
 Enabling/disabling switching via hotkeys on page 54
Accessing computers by using a serial device
Another way to switch the channels is using a serial device that is connected to the
RS232
interface of the KVM switch.
A serial device can be a special keypad or a computer with an installed terminal
emulator.
The paragraph
Switching to computers by using a serial device
on page 24 provides more
information on this topic.
Permanent switching of USB 2.0 devices
In the default settings of the KVM switch, KVM data and the data of devices con-
nected to the »USB 2.0 Devices« interface are forwarded to the computer of the
active channel.
Enable USB pinning (see page 53) if you want to permanently switch the data of
devices connected to the »USB 2.0 Devices« interface to a defined channel. The per-
manent switching of these devices (see page 16) remains the same even when
switching the KVM channel.
NOTE: An information display shows the active channel (see page 39).
ADVICE: The select keys are displayed in the right column of the Select Computer
menu (see page 14).