G&D DVIMUX8-OSD-USB, Инструкция по установке и эксплуатации

Страница: 115 / 140

Configuration
G&D DVIMUX8-OSD-USB · 41
English
Positioning the On-Screen Display
In the default configuration, the On-Screen Display of the KVM switch is displayed
in the middle of the console monitor. However, you can adjust the position to your
needs.
How to change the position of the On-Screen Display:
1. Press Ctrl+Num (standard) to open the On-Screen Display.
2. Press F1 to open the menu.
3. Use the Arrow keys to select Console Setup and press Enter .
4. Use the Arrow keys to select Menu Position and press Enter .
5. Press the Arrow keys or use the mouse to move the menu to the desired position.
6. Press Enter or the left mouse key.
7. Press F1 to save your settings.
Adjusting the scancode set of PS/2 keyboards
If you press a key at the PS/2 keyboard, the keyboard processor sends a data packet
that is called scan code. The two common scancode sets (sets 2 and 3) contain differ-
ent scancodes.
In the default configuration, the user module interprets any entry made at the PS/2
keyboard with the scancode set 2.
Use the scancode set 3 if you cannot enter the pipe “|” or the arrow keys do not
work as expected.
MENU POSITION DVIMUX8
Esc Enter F1:Save
IMPORTANT: Only the
Supervisor
can change this setting.