G&D DVIMUX8-OSD-USB, Инструкция по установке и эксплуатации

Страница: 80 / 140

Installation
6 · G&D DVIMUX8-OSD-USB
3. Before installing the KVM switch, decide which button on the front panel of the
device you want to assign to which computer.
Connecting console devices
Keyb.: Plug the connection cable of the USB keyboard in this interface.
Mouse:
Plug the connection cable of the USB mouse in this interface.
Line In:
Connect a microphone or a headset to this interface.
Speaker: Connect the speakers to this interface for output of the audio signals of the
active computer.
Monitor 1:
Plug the monitor‘s DVI cable to this interface.
USB 2.0 Devices:
If you want the USB devices (for example a printer or a mass stor-
age device) to be available to the connected computers, connect these devices to the
interfaces on the front panel (see figure 1 on page 5).
Connecting computers
NOTE: Connect the console devices preferably block by block and from the bottom up.
By doing so, you will avoid already connected cables blocking your view of the inter-
faces.
Figure 2: Interfaces for connecting the console devices
IMPORTANT: You can also connect both input devices to the USB 2.0 Devices on the
front panel of the device.
In this case, you cannot use the keyboard to switch between channels.
NOTE: If you purchased the multi-channel variant of the KVM switch, connect the
second monitor to the Monitor 2 interface.
IMPORTANT: Connecting computers to the KVM switch requires KVM cable sets.
You can find a list of all available KVM cable sets on page 61.
Assign the KVM cable sets to the different computers and have them available for
installation.
Power
Monitor 1
Keyb./Mouse Speaker
CON
Line In Line In USB 2.0 Line Out
CPU 1
DVI-I CPU 1
Line In USB 2.0 Line Out
CPU 2
DVI-I CPU 2
Line In USB 2.0 Line Out
CPU 8
DVI-I CPU 8
Line In USB 2.0 Line Out
CPU 7
DVI-I CPU 7