G&D DP1.2-VisionXG-Fiber Series, Инструкция по установке и эксплуатации

Страница: 94 / 156

Installation
13 · G&D DP1.2-VisionXG-Fiber
Connecting keyboard and mouse to the console
Keyb./Mouse:
Connect the mouse and/or the keyboard of the console to this interface.
Generic: In the default settings, you can use this interface to connect another USB
input device or a supported display or tablet.
Activate the generic HID mode (see Selecting the USB-HID mode on page 42) if you want
to connect another USB input device. In this mode, any data of the USB input device
is not altered when transmitted to the computer module.
PS/2: Connect the PS/2 keyboard of the console.
Connecting the console monitor
DP Out: Connect the console monitor.
NOTE: Both the keyboard and the mouse of the console can either be PS/2 or USB
devices.
IMPORTANT: If the
generic HID
mode is active, the OSD cannot be operated by a
keyboard connected to the
Generic
socket.
ADVICE: Use the adapter
MD6M-2xMD6F
(A6400043) to connect a PS/2 keyboard
and
a PS/2 mouse.
NOTE: Each video channel of the MultiChannel variant is provided with one DP Out
interface. The numbers behind the interface names assign each interface to a given
channel.
PS/2
Generic
Keyb./Mouse RS232 In Out
Line
Ready Ident.
System Fail
Network A
Network B
Main Power Red. Power
Power
Red.
Main
Network A
Network B
DP Out PS/2
Generic
Keyb./Mouse USB 2.0 Devices
Host
Link
Transmission
A B