G&D DP1.2-VisionXG-Fiber Series, Инструкция по установке и эксплуатации

Страница: 121 / 156

Configuration
G&D DP1.2-VisionXG-Fiber · 40
English
How to configure the Freeze mode:
OSD
1. Press Ctrl+Num (default) to open the on-screen display.
2. Select the row Console setup and press Enter .
The Freeze mode is adjusted separately for each video channel of the user module. The
following options can be adjusted separately for each video channel of multi-channel
devices.
3. Under Freeze mode press F8 to select on of the following options:
off  Freeze mode is disabled ( default )
with buffer  Freeze mode is active (with buffer)
without buffer  Freeze mode is active (without buffer)
4. If the Freeze mode is active, press F8 to select one of the options available
under Freeze visualization :
frame  shows a coloured frame when disconnected
OSD  shows Frozen and the time passed since disconnection
frame+OSD  shows a coloured frame ( frame ) and Frozen ( OSD )
5. Press F2 to save your settings.
Config
Panel
1. In the menu, click on KVM extender .
2. Click on the KVM extender you want to configure and then click on
Configuration .
3. Click on the tab Video channels .
4. When using a multi-channel device, click on the desired video channel and
then click on Configuration .
5. In the Freeze mode field, select one of the following options:
Off  Show no image if the connection is lost (default).
On | OSD timer + frame  Display of a coloured frame in case of a
disconnection as well as display of the warning
Frozen and the time elapsed since the
disconnection.
On | Frame  A disconnection is indicated by a coloured frame.
On | OSD  Display of the warning Frozen and the time elapsed
since the disconnection.
6. If the Freeze mode is active, you can use the Freeze mode buffer field to
switch the buffer on ( With buffer ) or off ( Without buffer ).
7. Click on Save .