G&D DP1.2-VisionXG-Fiber Series, Инструкция по установке и эксплуатации

Страница: 129 / 156

Configuration
G&D DP1.2-VisionXG-Fiber · 48
English
How to enable/disable the reinitialisation of USB devices:
Config
Pane
l
1. In the menu, click on KVM extender .
2. Click on the KVM extender you want to configure and then click
on Configuration .
3. Click on the tab General .
4. Click on the tab CPU if you want to configure the setting of the local work-
station (on the CPU module).
Click on the tab CON if you want to configure the setting of the remote
workstation (on the CON module).
5. In the USB Auto Refresh field of the Configuration section, select one of the fol-
lowing options:
Off  The connected USB input devices do not need
to be reinitialised.
All devices  All USB devices are regularly reinitialised.
Only faulty devices  The status of USB devices is monitored. If the
communication with a USB devices is interrupted,
the device is reinitialised (recommended setting).
6. Click on Save .