Page 14 of 35
USE AT LEAST
3 WIRE TIES
AS SUPPLIED
THROUGH HOLES
ON DEADFRONT
WIRE TIE
IN 2 PLACES
TO BACK OF
ENCLOSURE
DRESS WIRES NEAR
TOP OF ENCLOSURE
CLEAR OF ADDER
MODULES
Fig.8:
General Field Wiring Considerations
7.0 MODULE FIELD WIRING
7.1 GENERAL FIELD WIRING CONSIDERATIONS
Because most of the Field Wiring on the
Flex 4
and
Flex 8
is to the Main Board(s) on the swinging Dead Front panel,
it is very important to properly dress the wires so as not to place stress on either their connection to the boards, or
running to conduit. The figure below shows the required wiring techniques.
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com
