Game Composites GB1 GameBird, Руководство по обслуживанию

Страница: 197 / 269

Maintenance Manual GB1 GameBird
Page date: April 24, 2020
40-12
OAT Probe
The Garmin GTP 59 is an outside mounted temperature probe that provides raw air temperature data to the
Engine Data Converter. The temperature input device is a three-wire temperature probe interface. OAT Power
Out and OAT High are connected internally at the OAT probe.
Electrical power for the OAT Probe is provided through the Engine Data Converter GEA 24, via the Battery
Master (essential bus) and 2A EDC circuit breaker on the circuit breaker panel, located in the RH side console
in the rear cockpit.
Location: In RH landing gear leg fairing
Type: GTP 59 PN 011-00978-00
Manufacturer: Garmin International, Inc.
1200 East 151st Street, Olathe, Kansas 66062, USA
Tel: 913.397.8200
Fax: +1 913.397.8282
Aircraft on Ground (AOG) Hotline: +1 913.397.0836
www.garmin.com
To service the OAT Probe:
1 Remove cowling, refer to section 71-02
2 Disconnect electrical connection
3 Unscrew nut
4 Push sensor backwards
5 Remove unit from airplane
6 Service or replace as required
7 To reinstall, reverse steps 1 – 4
8 To check function, switch ON Battery Master, check OAT reading in line with ambient temperature
(check against engine temperatures, engine must be cold). Switch Battery Master OFF.
9 Install cowling, refer to section 71-02
Signature
10 Sign for correct installation
No regular maintenance is required for the unit. If defective, the unit must be replaced.
For wiring and connection details, refer to section 24-03 .
Troubleshooting or additional information:
Refer to Garmin G3X Touch Installation Manual, 190-01115-01_AE, available at
www.gamecomposites.com