Game Composites GB1 GameBird, Руководство по обслуживанию

Страница: 135 / 269

Maintenance Manual GB1 GameBird
Page date: April 24, 2020
27-35
Reinstall Front Seat Flight Controls
Reinstall Front Control Stick
1. Remove both seat cushions and seat panels (6 screws front panel, 4 screws rear)
2. Remove baggage bay access panel
3. Remove fasteners from aft control stick
4. Locate interconnecting rod through the baggage bay access hatch
5. Install fasteners in aft control stick
6. Install cotter pins
7. Locate front control stick
8. Install fasteners in front control stick
Signature
9. Install cotter pins
10. Connect front control stick PTT connector
11. Install both seat panels and seat cushions
Signature
13. Install baggage bay access panel
Reinstall Front Rudder Pedals
1. Remove front seat cushion and seat panel (6 screws)
2. Remove front instrument panel
3. Remove fasteners for bump stop assemblies
4. Disconnect brake line from rear pedals to firewall
5. Locate pedal assemblies in airplane
6. Connect brake lines to firewall and lines connecting aft and front pedals
to bottom port of front brake cylinders
7. Slide pedal assemblies on rails
8. Connect both front pedal adjusters to bellcranks
Signature
9. Install cotter pins
10. Install both bump stop assemblies
11. Bleed brakes in accordance with section 12-10
12. Install front instrument panel
Signature
13. Install front seat cushion and seat panel
Reconnect Front Seat Engine Controls
1. Set front and aft engine control levers to identical positions
Signature
2. Install screws, secure with torque seal