Game Composites GB1 GameBird, Руководство по обслуживанию

Страница: 88 / 269

Maintenance Manual GB1 GameBird
Page date: April 24, 2020
24-23
Master Relay
Location: Compartment under the left front leg support, tank support wall,
behind Starter Relay
Type: 70-111226-6
Manufacturer: White-Rodgers
8100 West Florissant, PO Box 36922, St. Louis, MO 63136-9022, USA
www.emersonclimate.com
No regular maintenance is required for the unit. When defective, unit must be replaced.
To access the Master Relay:
1. Remove the left-hand foot rest panel; refer to 5-05
2. Disconnect battery
3. Disconnect leads
4. Remove fasteners
5. Remove Master Relay from airplane
6. Replace Master Relay if required
7. Reinstall reversing steps 1 – 4
Signature
8. Check for correct assembly
9. Function check: Switch on Battery Master, check if electric system gets activated
For troubleshooting information see section 24-11 below.
Starter Relay
Location: Compartment under the left front leg support, tank support wall,
in front of Master Relay
Type: SNLS-1351
Manufacturer: UNIPOINT
8F, #105, Sec.2, Tun-Hwa S. Road, Taipei, TAIWAN
www.unipoint.com.tw
No regular maintenance is required for the unit. When defective, unit must be replaced.
To access the Starter Relay:
1. Remove the left-hand foot rest panel; refer to 5-05
2. Disconnect battery
3. Disconnect leads
4. Remove fasteners
5. Remove Starter Relay from airplane
6. Replace Starter Relay as required
7. Reinstall reversing steps 1 – 4
Signature
8. Check for correct assembly
9. Function Check:
a.
Battery Master ON
b. Ensure Mixture is in CUTOFF position
c. Prop area is CLEAR
d. Activate starter for less than 2 seconds
e. Battery Master OFF
For troubleshooting information see section
24-11 below.