Game Composites GB1 GameBird, Руководство по обслуживанию

Страница: 244 / 269

Maintenance Manual GB1 GameBird
Page date: April 24, 2020
71-2
General
To obtain information required to conduct maintenance on the engine, Lycoming manual and parts catalogue,
which can be found at
www.gamecomposites.com .
To identify the current publications and prices, use Lycoming Service Letter L114 which is freely available on
the Lycoming web site.
The engine, its associated systems and installation are described in sections 1.
An inverted oil system (Christen 801 inverted oil system) is installed as described in section 79.
Oil temperature is regulated through the oil cooler system as described in section 79.
If replacement of the engine or propeller control cables is done, renew the sealing of the bushing grooves and
gaps at the engine side of the fire wall. Use PR812 high temperature sealant for sealing the firewall to the
fuselage and for filling any gaps around cable bundles or where the firewall panels meet.
Cowling – GB1-7110-00-00
To service the cowling, or access items under the cowling:
1 Remove all screws holding the RH cowling (AN525-10-R9, Phillips 2 screwdriver required)
2 Remove the RH cowling half
3 Remove all screws holding the LH cowling (AN525-10-R9, Phillips 2 screwdriver required)
4 Remove the LH cowling half
5 Clean all components
6 Inspect standard fasteners in accordance with 5-06 , No.1
7 Inspect Click Bonds in accordance with 5-06 , No.2
8 Inspection of composite structures is described in section 51-01
9 Repair of composite structures is described in sections 51-05 to 51-08
10 To reinstall, reverse steps 1 – 4
Vulcan Fiber washers under heads of AN525 screws, to be replaced on condition: P/N 10038970
Manufacturer: Menzel & Seyfried GmbH
Olchinger Strasse 60
82194 Groebenzell, Germany
www.gummi-menzel.de