Before using for the first time
en
11
The air must not be discharged into a
flue that is used for exhausting fumes
from appliances burning gas or other
fuels (not applicable to appliances that
only discharge the air back into the
room).
¡
If the exhaust air is to be conveyed
into a non-functioning smoke or ex-
haust gas flue, you must obtain the
consent of the heating engineer re-
sponsible.
¡
If the exhaust air is conveyed
through the external wall, a tele-
scopic duct should be used.
7.2 Air recirculation
The air which is drawn in is cleaned by the grease fil-
ters and an odour filter, and conveyed back into the
room.
To bind odours in air recirculation
mode, you must install an odour filter.
The different options for operating the
appliance in air circulation mode can
be found in our catalogue. Alternatively,
ask your dealer. The required accessor-
ies are available from specialist retail-
ers, from our after-sales service or from
the online shop.
Note:
When cooking intensively and for a long time,
moisture is released into the air in the room. When us-
ing the appliance in air recirculation mode, we recom-
mend ventilating the kitchen adequately, e.g. by briefly
opening a window to remove excessive moisture.
Before using for the first time
8 Before using for the first time
Implement the settings for the initial configuration.
Clean the appliance and accessories.
8.1 Setting an operating mode
Requirement:
When it is delivered, the appliance is set
to air recirculation mode.
▶
To change the appliance to air extraction mode, see
Basic settings →
.
8.2 Setting Home Connect
1.
When you first switch on the appliance, you will be
prompted to set up your home network.
is lit
dimly for a few seconds on the display panel. To be-
gin setting up the connection, press .
2.
Set up Home Connect.
→
To exit the initial set-up, press any symbol.
TwistPad® with twist knob
9 TwistPad® with twist knob
The TwistPad® is the area in which you can use the
twist knob to select the cooking zones and heat set-
tings. The twist knob is magnetic.
9.1 Positioning the twist knob
▶
Place the twist knob in the centre of the area
marked on the TwistPad®.
‒
Make sure that the twist knob is in the centre of
the indicators which delimit the TwistPad® area.
9.2 Activating the cooking zone using the
twist knob
Requirement:
The twist knob is placed in the centre of
the area marked on the TwistPad®.
▶
To activate a cooking zone, tilt the twist knob to-
wards the required cooking zone.
9.3 Setting the heat setting using the twist
knob
Requirement:
The twist knob is placed in the centre of
the area marked on the TwistPad®.
▶
Turn the twist knob to select the required heat set-
ting.
9.4 Removing the twist knob
You can remove the twist knob during the cooking pro-
cess.
WARNING ‒ Risk of burns!
The hob may continue to heat up. If a metallic object is
placed in the TwistPad® area during the 10 minutes
after removing the twist knob, the hob may continue to
heat up.
▶
Always switch off the hob using the main switch.
▶
Remove the twist knob from the TwistPad®.
a
The Wipe protection function is activated for
10 minutes.
a
If the twist knob is not returned to its position before
this time elapses, the hob switches off.
9.5 Instructions for use
¡
A strong magnet is located inside the rotary knob.
Keep the rotary knob away from magnetic data car-
riers such as credit cards and cards with magnetic
strips. It may damage them. The magnet may also
cause faults on televisions and screens.
¡
The rotary knob is magnetic. Metal particles stuck to
the bottom may scratch the surface of the hob. Al-
ways clean the twist knob thoroughly. →
