Gaggenau BS 470 612, Инструкция по использованию и уходу

Страница: 45 / 68

45
Troubleshooting
en-us
Removing the wire racks
The wire racks can be removed for cleaning.
Detaching the wire racks
1.
Place a dishcloth in the oven cavity to protect the
enamel from scratches.
2.
Undo the knurled nuts (Fig. A).
3.
Lift the wire racks slightly sideways away from the
screw and pull them out towards the front (Fig. B).
You can clean the wire racks in the dishwasher.
Refitting the wire racks
1.
Attach the wire racks the right way round – with the
end stop at the back.
2.
Slide the back of wire racks onto the bolts, then
reattach them at the front.
3.
Tighten the knurled nuts.
Note: If a knurled nut is lost, you can order it from
Customer Service as a spare part. The use of non-
original knurled nuts may lead to corrosion in the oven
cavity.
3
Troubleshooting
Troubleshooting
You can often easily eliminate problems that may occur
on your own. Before calling Customer Service, take into
account the following information.
9
WARNING
Risk of electric shock!
Improper repairs are dangerous. Only an
authorized servicer may perform repairs and may
replace damaged plug and connections. Remove
the power plug or turn off the circuit breaker or
fuse in the fuse box if the appliance is damaged or
not working. Call Customer Service.
9
WARNING
Risk of injury!
The light emitted by LED lights is very dazzling, and
can damage the eyes (risk group 1). Do not look
directly into the switched on LED lights for longer
than 100 seconds.
LED lights
Defective LED lights must only be replaced by the
manufacturer, their customer service department or a
licensed technician (electrician).
$ %