Gaggenau BS 470 612, Инструкция по использованию и уходу

Страница: 20 / 68

20
en-us
Operating the appliance
When pushing in the perforated cooking container, make
sure that the engaging lug (a) points upwards.
Turning on
1.
Use the function selector to set the type of heating.
The selected heating type and suggested temperature
appear on the display.
2.
If you would like to change the temperature:
Turn the rotary selector to set the desired
temperature.
The preheat symbol
’
appears on the display. The bar
shows the current preheat status. When the set
temperature has been reached, a signal sounds and the
’
preheat symbol goes out.
Note: The temperature that has been set will be retained
when you change to a different operating mode. The
suggested temperature only appears when the appliance
is switched on.
Turning off
Turn the function selector to 0 .
Depending on the operating mode, you may hear an
automatic rinse cycle running.
Steam injection
With misting, steam is specifically injected into the oven
cavity. This enables you to bake, e.g. bread and bread
rolls, with sufficient moisture.
Misting only works with these heating modes:
▯
Conv 30% humidity
▯
Conv 0% humidity
▯
Broil + circulated air
To start misting, touch the
ð
symbol. After a short while,
steam is injected into the oven cavity.
Steam is injected for approx. 5 minutes.
To cancel misting:
Press the
ñ
symbol.
Steam removal
During the steam removal process, cold water is
introduced into the oven cavity. This cools the oven cavity
down and the steam condenses on the oven cavity walls.
When you open the oven door afterwards, only a little
steam escapes.
9
WARNING
Risk of Scalding!
After opening the oven door, hot water may drip
down from it.
Steam removal only works with the following heating
modes and if the temperature in the oven cavity is less
than 265° F (130 °C):
▯
Conv 100% Humidity
▯
Conv 80% Humidity
▯
Conv 60% Humidity
▯
Broil level 1 + Humidity
▯
Broil level 2 + Humidity
▯
Sous-vide cooking
Proceed as follows:
Touch the
¡
symbol. Steam removal lasts about
20 seconds. The heating remains switched off during
steam removal.
Stopping steam removal early:
Open the oven door or touch the
¢
symbol.
Notes
▯
The steam removal function remains available for a
short time after turning off the appliance.
▯
When an automatic program cooking timer runs out,
steam removal will be performed automatically at the
end of the program.
D
D
D
D