Gaggenau BS 470 612, Инструкция по использованию и уходу

Страница: 19 / 68

19
Activating the appliance
en-us
9
Activating the appliance
Activating the appliance
Standby
The appliance is in the standby mode when no function is
set or the child lock is activated.
The control panel's brightness is reduced in the standby
mode.
Notes
▯
Different displays can be shown in standby mode. The
default setting is the GAGGENAU logo and the time.
You can adjust the display using the "Standby screen"
setting in the basic settings.
~
"Basic settings"
on page 37
▯
The brightness of the display depends on the vertical
viewing angle. You can adjust the display using the
"Brightness" setting in the basic settings.
Activate appliance
In order to exit standby mode, you can either
▯
Set the function selector,
▯
Touch a control panel,
▯
or open or close the door.
Now you can set the desired function. Read the
appropriate chapters to learn how to set functions.
Notes
▯
If "Standby screen = off" is selected in the factory
setting, you must turn the function selector to exit the
standby mode.
▯
The standby display appears again if you have not
made any settings for a long while after activation.
▯
The cooking compartment lighting goes out after a
little while if the door is open.
1
Operating the appliance
Operating the appliance
Oven interior
The oven cavity has three shelf positions. The shelf
positions are counted from the bottom up.
Note: When steaming, defrosting, dough proofing and
refreshing, you can use up to three insertion levels at the
same time. You can only bake on one level, use level 2
when baking (or level 1 for higher cake tins). For very
small baked goods, you can also use two levels, e.g.
level 1 and level 3.
9
CAUTION
▯
Do not place anything on the cooking
compartment floor. Do not cover it with
aluminum foil. A build-up of heat could damage
the appliance or cause injury.
The oven cavity floor must always be kept clear.
Always place ovenware in a perforated cooking
container or on a wire rack..
▯
Do not slide any accessories between the shelf
positions, or they may tip.
Inserting accessories
The rack and the perforated cooking container feature a
latching function. The latching function prevents tilting of
accessories when pulling them out. You must insert
accessories into the oven cavity correctly so that tilt
protection will work. When removing accessories, you
must raise them slightly.
When inserting the rack, make sure
▯
that the engaging lug (a) points upward
▯
that the rack's safety clip is at the rear and top.