FUTABA T12Z, Обновление программного обеспечения, Страница: 8 / 16

- 8 -
Character input
Lower case alphabetic characters and katakana, etc.
can be used.
1.
When the DATA dial is turned, the input
character field cursor moves left and right.
2. When the CURSOR lever is moved up, down, left,
or right, the candidate characters list moves.
When the DATA button is pressed, the character
on the cursor is input.
3. When the CURSOR lever is pressed, the
candidate characters list is switched alphabet,
numbers/symbols and katakana.
4. To enter the input, operate the CURSOR lever
and select [ENTER] and press the DATA button.
5. To cancel input, operate the CURSOR lever and
select [CANCEL] and press the DATA button.
Pitch angle display mode
The system has been made compatible with pitch angle
display.
1. Open [PITCH CURVE] of the Model Menu.
2. Move the cursor and display the page 4.
3. Select “UNIT” and turn the DATA dial and switch
the display to [DEG.] or [%].
※
The display blinks.
[DEG.] : Angle display mode
[%] : % display mode
4. When the DATA button is pressed, the setting is
changed.
5. When [ANGLE] is selected and the DATA dial is
pressed, the angle setup screen is displayed.
6. Set high pitch. Move the pitch control to high
pitch and move the cursor to [HIGH]. Turn the
DATA dial and set the angle.
7. Set center pitch. Move the pitch control to the
hovering point and move the cursor to [CENTER].
Turn the DATA dial and set the angle.
8. Set low pitch. Move the pitch control to low pitch
and move the cursor to [LOW]. Turn the DATA
dial and set the angle.
AFR, D/R
The following functions cannot be selected at AFR and
D/R because they are not effective.
•
Ailerons 2,3,4
• Flaps 2,4
•
Rudder 2
• Throttle (helicopter only)
• Pitch
•
Camber
• Gyro 1,2,3
• Governor 1,2
•
Mixture
• Multiprop
Stick setting
The adjustable range of the stick response is reduced
to 1-16.