FUTABA T12Z, Обновление программного обеспечения, Страница: 2 / 16

- 2 -
6. The band setting changes accordingly to reflect
the selection of the 2.4GHz band. The display will
return to the frequency confirmation screen.
Range Check Mode Operation
The 'range check mode' reduces the transmission
range of the radio waves to allow for a ground range
check.
The range check mode, when activated, will
continue for 90 seconds unless the user exits this
mode early. When the progress bar reaches 90s,
the RF transmission automatically returns to the
normal operating power.
WARNING
Do not fly in the range check mode.
Since the range of the radio waves is short, if the
model is too far from the transmitter, control will
be lost and the model will crash.
1. Turn ON the transmitter's power switch. Select
[NO] on the frequency confirmation screen.
For safety, the RANGE CHECK mode can not be
selected while the RF transmission is active.
2. With the system menu selected press the DATA
button, choose the [RANGE CHECK] selection
from the menu options and press the DATA
button.
3. The RANGE CHECK screen is displayed. To
activate the RANGE CHECK mode select [YES]
and then press the DATA button. During the
RANGE CHECK period, the RF power is reduced
to allow the ground range tests to be performed.
Operation can be cancelled by pressing the
“RETURN” or “HOME” button.
4. The Range Check function automatically exits
after the 90 second time limit has expired. Should
you complete the range check before the 90
seconds has passed, select [EXIT] and press the
DATA button.
When [RESTART] is selected and the DATA
button is pressed, the range check mode timer is
returned to 0.
Please note, upon expiration of the 90 seconds, or
when [EXIT] is selected, the transmitter will
automatically return to the normal RF operation
as noted on the display.
Once the 14MZ is transmitting at full power, it is
not possible to enter the Range Check mode
without first switching the transmitter Off and
back On. This has been designed to prevent a
modeler from inadvertently flying in the Range
Check mode.
5. When [EXIT] is selected and the DATA button is
pressed, the RANGE CHECK mode is disabled
and the 12Z will begin transmitting at full power.
After the RANGE CHECK mode was reset, it
cannot be selected again. To select the RANGE
CHECK mode again, turn on the power switch and
start from the beginning.