
- 6 -
Data initialization after swash type switching
In the past when the swash type was changed, all of
the model data had to be initialized. Starting with
version 1.3.0 it is possible to change the swash type
and the software will automatically transfer the
settings. There are a few swash type conversions
that are not possible, please see the table below for
more information.
If the swash type data can be retained the
transmitter will prompt with “Initialize all data?”
Answer [No] if you would like to retain the swash
settings answer. Answer [Yes] if you would like
the data initialized then answer.
It may not be possible to continue the model data,
depending on the swash type before and after
modification.
Before
modification
After
modification
Continuation
H-1,H-2,HE3,
HR3,HN3,H-3
H-1,H-2,HE3,
HR3,HN3,H-3
Possible
H-4,H-4X H-4,H-4X Possible
H-1,H-2,HE3,
HR3,HN3,H-3
H-4,H-4X Impossible
H-4,H-4X
H-1,H-2,HE3,
HR3,HN3,H-3
Impossible
1. When the swash type is changed, and if the data
can be retained, a data initialization confirmation
screen is displayed. When [YES] is selected and
the DATA button is pressed, the data is initialized.
When [NO] is selected and the DATA button is
pressed, the data is retained.
Verify that all of the settings are correct before
operating your model.
Mixing switch NULL-ON/OFF setting
When the switch type “NULL” is selected, you can
toggle the On/Off option manually.
1. Open the mixing switch selection screen. Select
[NULL] and press the DATA button.
2. The on/off setup screen is displayed. Turn the
DATA dial and switch the display to [ON] or
[OFF].
※
The display blinks.
[ON] : Mixing always on.
[OFF] : Mixing always off.
3. When the DATA button is pressed, the setting is
changed.
Function name
The function name can be changed for the full name
(10 characters) or for the abbreviated name (4
characters).
1. Select [FUNCTION NAME] of the Linkage Menu
and press the DATA button.
2. The FUNCTION NAME setup screen is
displayed.
3. Select the function to be renamed and select the
[Rename] and the DATA button is pressed. A
character input screen is displayed. Type in the
new function name and select [Enter] and press
the DATA button to store the new function name,
or press the RETURN button to cancel.
4. When [RESET] is selected and the DATA button
is held down, the function name is reset to the
initial state function name.
Содержание T12Z
Страница 16: ...16...