FUTABA T12Z, Обновление программного обеспечения, Страница: 15 / 16

- 15 -
6. The pitch curve becomes a curve containing the pitch
trim (hovering pitch, low side pitch, high side pitch). A
curve containing the pitch trim (hovering pitch, low pitch,
high pitch) is also displayed at the new pitch curve.
Notes
:
·
When the curve mode is only "LINE" and "SPLINE", the
COPY button is displayed.
·
When the pitch trim is INH or the control of the pitch trim
is not set, the copy function doesn't work.
THROTTLE CURVE [Model Menu]
A function which copies a curve containing the hovering throttle
trim when the curve mode is LINE and SPLINE has been
added.
Setting method
1. Open the throttle curve setting screen.
2. Set the curve mode to LINE or SPLINE.
3. Set the hovering throttle trim.
4. Operate the hovering throttle trim.
5. Use the cursor lever to move the cursor to COPY, and
push the DATA button for at least 1 second.
6. The throttle curve becomes a curve containing the
hovering throttle trim. A curve containing the hovering
throttle trim is also displayed at the new throttle curve.
Notes
:
·
When the curve mode is only "LINE" and "SPLINE", the
COPY button is displayed.
·
When the hovering throttle trim is INH or the control is not
set, the copy function doesn't work.
FUNCTION [Linkage Menu]
When the modulation is “PCM-G3”, the switch channel DG1
and DG2 are added to the function setting.
The control of DG1 and DG2 are able to select.
SERVO REVERSE [Linkage Menu]
When the modulation is “PCM-G3”, the switch channel DG1
and DG2 are added to the servo reverse setting.
Copy function added