33
The servo reverse function may be used when you need to change the direction that a
servo responds to a control stick motion. When you use this function, BE SURE
THAT YOUR CONTROL IS MOVING THE CORRECT DIRECTION. If you are
using Advance Menu functions, set correct travels in the REVERS menu first, before
setting up the Advance Menu.
Reversing Servos
To PARA
function
To F/S function
Data input keys
These keys are used to
reverse channels 1-8 in
this menu as needed.
Channel display NORM or REV
display indicates
travel setting
1. Aileron setting
Select "NORM" or "REV" with the
(+)/(-) keys.
2. Repeat above procedure to reverse
channels 2-8 as necessary:
2 = Elevator
3 = Throttle
4 = Rudder
5 = Gyro
6 = Pitch
7 = CH7
8 = CH8
Indicates NORM or REVERS throw
setting
*The blinking item is what is
being set.
The parameter function includes a number of submenus that are used to input basic
model data settings. This is best understood by viewing the menu structure on p. 16.
To INVERT or SWASH
function
To REVERS
function
"NEXT" indicates that there is
a group of submenus in the
PARA function .
Use the (>)/(<) keys to move to
the other submenus within the
PARA function.
PARA includes five
functions:
• Data reset
• ATL
• Engine starter
• Model type
• Modulation.
