Recording with the Drive Recorder
46
(13) Recording Screen (If Text View is Selected)
If Text View is selected, on the screen shown in section (8),
data will be acquired / displayed as text and will be
simultaneously saved in a file.
16 text items can be displayed simultaneously.
--- Touch this button to end data recording: go to
section (15).
If 0 points of data are recorded: go to section (16).
--- Touch this button for manual triggering (Note
that if Diag. Trigger has been selected as the
triggering method, this operation will not function.)
--- Touch this button to pause the Data List display.
To resume display, touch this button again.
The data recording operation will continue, even if
Data List display is paused.
<Note>
•
Even if triggering occurs, the recording operation will
continue until the button is touched.
•
Once the recording screen is displayed, the amount of
available PC hard disc space will be checked. If 100 MB
or less space is available, a message will be displayed
and the recording operation will be canceled.
•
Once 20,000 data points have been recorded, a message
will be displayed and the recording operation will end. (If
the sampling interval is 1 second, then 1 data point will be
recorded each second. Therefore, when converted to
time, approximately 5.5 hours are required to record
20,000 data points. If the sampling interval is 10 seconds,
the time conversion will be approximately 55 hours. If
the sampling interval is 1 minute, the time conversion will
be approximately 333 hours.)
•
In the event that an error occurs during the data recording
operation, all data recorded up until the time of the error
will be saved.
