Fusion FBUL NP12-12, Инструкция по установке и наладке

Страница: 71 / 88

Fusion Installation & Commissioning Manual Approved document No UI-FBU-01 issue 3.0
71
CONFIGURATION (continued)
Device configuration
Device types
Generic types are used for setting the expected type for programming purposes. The panel will use
the specific device type code found and deal with the device according to its requirements as de-
tailed below:
OPT (optical types)
ION (ionisation types)
These devices have only one associated text message & zone allocation. If the device is Discovery
protocol, a sensitivity setting can apply. The default settings for this type are: - blank text, unassigned
for zone, sensitivity mid range , non silent mode, no group allocations, no base type set.
Part Number Type Sensitivity Input
attribute
55000-600 XP95 Optical n/a [s]
55000-885 XP95 Multi sensor n/a [s]
58000-600 Discovery Optical 1-5 [s]
58000-700 Discovery Multi sensor 1-5 [s]
55000-268 XP95 5-50M beam n/a [s]
55000-273 XP95 10-100M beam n/a [s]
55000-028/9 Flame detectors n/a [s]
Part Number Type Sensitivity Input
attribute
55000-500 XP95 ionization n/a [s]
58000-500 Discovery ionization 1-5 [s]
58000-300 Discovery C0 detector 1-5 [s]