Fusion FBUL NP12-12, Инструкция по установке и наладке

Страница: 62 / 88

Fusion Installation & Commissioning Manual Approved document No UI-FBU-01 issue 3.0
62
MENU AND CONTROL FUNCTIONS continued
Press ‘Menu’ button on keypad
OR
0 Enter access level 2
(enter access code 5839)
1 View active faults
2 View active disablements
3 View event logs
4 Test lamps
Access Level 1 (open to all personnel)
Menu Button = Enter / Exit option
Button [5] select or toggle option
Buttons, 2,4,6,8, navigate menu
1 View active faults
2 View active disablements
3 View event logs
4 Test lamps
5 Clear event logs
Access Level 2 (authorised personnel only)
6 Set disablements
7 Set clock
8 Activate test mode
9 Print options
10 Set delays / dependency
12 Enter access level 3
11 View groups
OFF
ON
ACTIVATE
CONTROLS
1 Set relays disablement
2 Set sounders disablement
3
Set loop isolate
4 Set zones disablement
5 Set radial/loop device disablements
6 Set auto enables
7 Remove all disablements
1 Relay #1
2 Relay #2
3 Set remote isolate
*
4 Common fault
5 Loop modules
*
Dependant upon
program settings
Enter access code
xxxx
Access level 3 (for service personnel only)
Refer to Installation Manual