Furuno FS-2575, Руководство оператора

Страница: 99 / 165

8. NBDP PREPARATIONS
8-3
8.2 Station List
The station list provides for storage of up to 50 stations, one frequency pair (RX and TX) per
station. For stations which have more than one frequency pair, you can add a suffix to the
station name to denote multiple frequency pairs. For example, station name FURUNO
followed by -1, -2, -3, etc. for each frequency pair required.
8.2.1 Registering stations
1. Press the function key F5 and then the 1 key to open the Station Entry screen.
On the right-hand side of the screen, Create and Change are shown.
Station Entry
Create
Change
Station List
Station Set Up
Station :
ID Code :
Mode : ARQ FEC
CH/Table : Channel ScanTable
Num/Table:
Station Entry screen
2. Create should be underlined. If it is not, underline it by pressing → , ↑ and the Enter key.
3. The cursor is now selecting Station. Enter station name, using up to 18 characters.
4. Press the
↓ key to select ID Code. Enter station ID code.
5. Press the ↓ key to select Mode. Select communication mode with ← or → among the
following:
ARQ: Automatic Retransmission Request
FEC: Forward Error Correction
6. Press the ↓ key to select CH/Table. Select Channel or ScanTable as appropriate.
7. Press the ↓ key to select Num/Table.
8. If you selected Channel at step 6, enter ITU channel number (see Appendix) or User
channel number.
9. If you selected ScanTable at step 6, press the → key to show scan group list registered.
For scan group, refer to section 8.5.
10. Select a scan group name by using the ↓ or ↑ key followed by pressing the Enter key.
Scanning Group List
INTREPID
VOYAGER
GLOBAL
T
Scanning group list