Furuno FS-2575, Руководство оператора

Страница: 84 / 165

6. MENU OPERATION
6-18
Deleting all send messages
1. Press the 4 key on the MESSAGE FILE list.
2. Rotate the ENTER knob to select DELETE ALL LISTS and then press the ENTER knob.
3. Rotate the ENTER knob to select YES and then press the ENTER knob.
6.15 Setting the AUTO ACK Details
The acknowledgement message can be sent automatically when you receive an individual
message or a PSTN message. You can also enable or disable it for position, polling and
test messages. Note that the automatic acknowledge is automatically disabled when RX
call contains error, as required by law. Further, automatic acknowledge is disabled in case
of OFF HOOK.
1. Rotate the
ENTER knob to select DSC on the MENU screen and then press the ENTER
knob.
2. Rotate the ENTER knob to select ACK SETTINGS and then press the ENTER knob.
Default:
AUTO (UNABLE)
AUTO (ABLE): Send ABLE
acknowledgement
automatically.
AUTO (UNABLE): Send
UNABLE acknowledgement
automatically.
AUTO (UNABLE): Send UNABLE
acknowledgement automatically.
MANUAL: Send acknowledgement
manually. Can select ABLE
acknowledgement or UNABLE
acknowledgement.
Sets reason for UNABLE.
Default: MANUAL
AUTO (ABLE): Send automatic
acknowledgement of position
request.
AUTO (UNABLE): Send
automatic acknowledgement of
no position information.
MANUAL: Send manual
acknowledgement.
Default: AUTO
AUTO:
Send automatic
acknowledgement of polling request.
MANUAL: Send manual
acknowledgement of polling request.
Default:
AUTO
AUTO:
Send automatic
acknowledgement of test call.
MANUAL: Send manual
acknowledgement of test call.
Default: NO REASON
’
’
Default:
AUTO (ABLE)
6.16 Special Messages
Permission to transmit NEUTRAL CRAFT and MEDICAL TRANSPORT can be enabled or
disabled as follows:
1. Rotate the
ENTER knob to select DSC on the MENU screen and then press the ENTER
knob.
2. Rotate the ENTER knob to select SPECIAL MSG and then press the ENTER knob.
3. Rotate the ENTER knob to select NEUTRAL or MEDICAL and then press the ENTER
knob.
4. Rotate the ENTER knob to select ABLE or UNABLE and then press the ENTER knob.