Furuno FS-2575, Руководство оператора

Страница: 95 / 165

7. NBDP SYSTEM OVERVIEW
7-9
5: Answerback Code Entry Register own ship’s answerback code.
6: Group ID Entry Register own ship’s group ID codes (4 or 5 digit).
7: Group ID Entry Register own ship’s group ID codes (9 digit).
8: Select ID Entry Register own ship’s selective ID codes (4 or 5 digit).
9: Select ID Entry Register own ship’s selective ID codes (9 digit).
Function key [F6]: System menu
The System menu is mainly for use by technicians and contains diagnostic tests. To change
settings, select Change from the item Setup and operate arrow keys to select item and
option. Press the
Enter key to register selection and close the menu.
Setup
Slave Delay
TX/RX MSG Save
Edit Before sending
Time System
Time & Date
Window Color
Self Test
Lock Change Default
8 msec (0- 50 msec)
OFF O N
OFF O N
OFF UTC SMT JST
2002/10/16 10:00:00
System
System menu
Setup Lock, change settings; restore default system settings.
Slave Delay Set the length of the slave delay timing from the end of RX to the
start of TX in the ARQ mode. The default setting is suitable in most
cases. This item cannot be adjusted by the user.
ARQ mode
signal
sequence
3 char. RX 3 char. RX
Slave Delay Timing
RX end
TX start
ACK signal
TX/RX MSG Save Turn on to automatically save incoming and outgoing messages to
a floppy disk. “Log” appears at the top of the screen when on.
Edit Before sending “OFF” transmits keying operation one by one. “ON” transmits
message only when the
Enter key is pressed after confirming text
typed.
Time System Select time system.
UTC: Coordinated universal time
SMT: Local time
JST: Japan standard time.
Time & Date Enter date and time manually. If a navigation device is connected,
the time is automatically set when the power is turned on or
whenever the time system is switched. Manual entry takes priority
over automatic entry. This item cannot be adjusted when using
JST or UTC.