Furuno FS-2575, Руководство оператора

Страница: 65 / 165

5. ROUTINE MESSAGE CALLING, RECEVING
5-19
14. Rotate the ENTER knob to select GO TO CALL and then press the ENTER knob. The
PSTN call is sent. After the call has been sent, the screen for waiting ACK appears. The
elapsed time since sending the call and the count down time for re-sending the call (25
seconds) is displayed. When you receive an acknowledge message, the audio alarm
sounds and the pop-up message appears.
15. Do one of the following depending on ACK message.
Able acknowledge message received
If the PSTN call is accepted, the PSTN connection call is sent. The timer counts down from
25 seconds to zero for waiting ACK of connection. When you receive PSTN ACK of
connection, the pop-up message “PSTN connected pick up HANDSET!” appears and the
communication frequency changes.
Note: When you do not receive PSTN ACK of connection within 25 seconds, the pop-up
message “PSTN disconnected because of timeout. [CANCEL]: Close window” appears.
1. Pick up the handset and communicate with the party you called. The following is the
screen for telephone calling. The elapsed time since starting communication is
displayed.
2.
To quit the communication, do one of the following.
•
When you quit the communication yourself, on hook the handset or press the CANCEL
key. END OF CALL is sent automatically. The screen for waiting ACK for END OF CALL
appears. When you receive the ACK, rotate the
ENTER knob to select QUIT and then
press the ENTER knob. Rotate the ENTER knob to select CONTINUE and then press
the ENTER knob.
• When the PSTN line is disconnected by the coast station, you receive the END OF ACK.
Rotate the
ENTER knob to select QUIT and then press the ENTER knob. Rotate the
ENTER knob to select CONTINUE and then press the ENTER knob.
Unable acknowledge message received
When you receive an unable acknowledge message, the audio alarm sounds. The pop-up
message appears. Rotate the
ENTER knob to select QUIT and then press the ENTER knob.
Rotate the ENTER knob to select CONTINUE and then press the ENTER knob.