Furuno FS-2575, Руководство оператора

Страница: 74 / 165

6. MENU OPERATION
6-8
6.6 Printing Messages
The PRINT menu enables/disables automatic printing of all transmitted and received calls
and the results of the daily test.
1. Rotate the
ENTER knob to select SYSTEM on the MENU screen and then press the
ENTER knob.
2. Rotate the ENTER knob to select PRINT and then press the ENTER knob.
3. Rotate the ENTER knob to select TX CALL and then press the ENTER knob.
4. Rotate the ENTER knob to select AUTO or MANUAL and then press the ENTER knob.
5. Set the settings for RX CALL and DAILY TEST as well as TX CALL.
6.7 Position Setting
Do the following to set the position:
1. Rotate the
ENTER knob to select SYSTEM on the MENU screen and then press the
ENTER knob.
2. Rotate the ENTER knob to select POSITION and then press the ENTER knob.
3. Rotate the ENTER knob to select SETTING and then press the ENTER knob.
4. Rotate the ENTER knob to select INPUT TYPE and then press the ENTER knob.
5. Rotate the ENTER knob to select GNSS, MANUAL or NO INFO and then press the
ENTER knob.
GNSS: The position data from GPS
MANUAL: Set the position data manually
NO INFO: No position data
For MANUAL, go to next step.
6. Using the numeric keys, enter latitude/longitude of position of your ship, and UTC. To
change coordinate, select it and press the 1 key for North or East; 2 key for South or
West. After entering each data, press the ENTER knob.